Sabre 42 Fly Bridge


The Sabre 42 Fly Bridge is the outcome of close discussions with Sabre’s clients and owners. The results: a yacht with the same level of personal luxury and comfort our owners have come to expect, with the added benefit of a fly bridge for an open air experience. The bridge offers an efficient layout both for entertaining and cruising, and joystick-controlled pod drives provide confidence and security while maneuvering.

Inboard motors, pod drives, and expert hull design make the cruising experience quieter and more fuel efficient than with outboards, while simultaneously maintaining truly satisfactory cruising and WOT speeds. Interior spaces preserve their functionality, even with the addition of the bridge, making for an uncompromisingly luxurious experience. Owners continue to enjoy all the comfort and amenities available in our iconic Salon Express series, with the added open-air space of the bridge.



Modified Deep “V” Planing hull design, with shallow pod drive recesses.
16º deadrise at transom, 23º deadrise amidships.
ISO NPG white gelcoat w/vinylester back-up resin.
Bottom, topsides and transom resin-infused biaxial E-glass with Corecell foam core.
Stringer system biaxial E-glass with foam core.
Molded E-glass swim platform with molded-in anti-skid surface and under mount ladder
Hull side rubbing strakes.
PVC rub rail with stainless steel cap.
LP Painted double boot top.
Gold color recessed cove stripe.

Deck and Hardtop
ISO NPG gelcoat.
Resin-infused biaxial E-glass with balsa core.
Molded-in anti-skid deck surfaces.
Sliding aft salon door slides starboard to port.
Sliding windows in salon cabin sides.
One fixed and one opening window in salon aft bulkhead.
Hinged access door to side deck at helm.
Flush, outward opening, transom door with latch.
Anchor locker with slam latch.
Large hatches with gas struts and compression hatches
Stainless steel hand rails at each corner on aft coamings
Large engine room hatch in main salon with compression latches.

Deck Hardware
1 1/4″ Diameter type 316 stainless steel perimeter rail system.
(6) 12” Stainless steel cleats (2 fwd, 4 mid ship, 2 in aft cockpit).
(1) 10” Stainless steel cleat to starboard of windlass as anchor rode tie off.
(2) Custom cast stainless steel mid-rail line chocks.
(2) Custom cast stainless steel skene chocks forward.
(4) Cast stainless steel hawse pipes in transom and hull sides.
Custom stainless steel bow pulpit with dual anchor roller.
Anchor windlass, electric rope-chain type.
Teak flag staff and socket on taffrail.
Burgee staff for bow pulpit.
(3) Lewmar Low Profile polished aluminum hatches w/screens.
(6) Custom stainless steel opening port lights.
Teak toe rails.
Teak cabin side eye-brow.
Custom cast stainless steel “SABRE” medallion.
Raw water washdown system at bow.

Lower Helm Station
Cummins DTS single lever electronic controls.
One Cummins Smart Craft display (engine data, tank levels, vessel data, alarms).
Triple windshield wipers with washers.
Ritchie Compass.
Switch controls for horn, running lights, anchor light, engine room blower and optional equipment.
Stazo 400mm custom teak steering wheel with tilt helm and Sabre logo
(1) Stidd N-series helm seat with Ultraleather fabric.

Twin Cummins QSB 425hp 6.7 liter electronic, fresh water-cooled diesel engines.
Twin CMD Zeus 3500 pod drives, with integrated steering and trim tabs.
Volvo IPS 500 and 600 options available
120A, 12V alternators each engine.
(2) Exhaust by-pass mufflers.
Engine room blower.
Engine room vent ducts.
Engine room floor with FRP anti-skid.
White gelcoated engine room
Mylar face foam noise barrier.

Fuel System
(2) 190 gal diesel fuel tanks port and starboard.
Racor fuel filters with water in fuel probes.
(2) x 2” “Diesel” deck fill plates.

Steering and Trim Systems
CMD helm, with joystick.
Trim tabs integrated in CMD Zeus pod drives.
Autopilot integrated in CMD Zeus system.
GPS receiver included.
“Skyhook” GPS position hold system.

12VDC Electrical System
Two AGM Group 31 dedicated engine start batteries.
Two AGM 4D deep cycle ship’s service batteries.
One AGM Group 24 generator start battery.
Remote control battery switches with controls at helm.
Manual emergency battery crossover switch.
Illuminated main circuit breaker distribution on bulkhead opposite galley.
Digital battery monitor.
LED cabin reading lights.
High output LED lights in the overhead.
Halogen strip lighting in appropriate locations.
LED engine room lighting.
Cockpit courtesy lights.
Tri-color lights over helm
Marine-grade, tinned wire throughout.
12VDC USB chargers at helm and in all cabins

120VAC Electrical Systems
Onan 9.0 kw generator including:
Onan E Series display
Dedicated start battery.
Water lift muffler.
Cooling water intake strainer.
Sound shield.
Transfer switch.
50A shore power cord on Glendining cord reel.
Isolation transformer protecting shore power.
Illuminated main circuit breaker distribution panel.
Digital AC system monitor
(1) 120V outlet in each cabin and (1) in engine room.
All galley and head receptacles are GFI protected.
Additional outlets positioned in locations appropriate for entertainment systems in main and forward cabin
50amp, 3-bank battery charger
Reverse cycle heat/ air conditioning in (3) zones.

Forward Stateroom
Spacious Island Berth layout with 5″ cushion. ¾” laminated trim.
Cherry hull ceilings.
(2) Drawers under berth. A/C return grills under drawers.
(2) drawers in bureau w/locker w/shelf above and single louvered door.
Upper enclosed shelves with storage behind. Locker face to have (2) louvered doors.
Recessed shelf with fiddle on starboard main bulkhead with 19” LED TV and DVD player.
Large cedar lined hanging locker to port, with louvered door, shelf and hangar pole.
Open shelf above port hanging locker.
Teak and holly sole.
Sound deadening soft headliner panels.
Pocket door to forward stateroom.

Second Stateroom
Double berth, 5″ foam cushions, ¾” laminated trim.
Cherry hull ceilings.
(4) Drawers under berth, A/C return grille beside.
Forward bulkhead storage locker, and shelf.
Night stand with drawers below.
Teak and holly sole.
Sound deadening soft headliner panels.
Pocket doors between lower foyer and second stateroom.
Optional dinette available in this space.
Surface mount LED TV

Stainless steel under mount oval sink.
Circular shower stall with seat and locker outboard.
Hot and cold pressure water
Electric shower sump pump.
Storage lockers.
Solid surface vanity top with bull nose.
Towel bar.
Wood trimmed mirror over sink.
Ventilation blower.

Mid-level galley.
Solid surface galley counter top.
Stainless steel under mount sink with Scandvik faucet.
Vitrifrigo 2-drawer Refrigeration with stainless steel doors.
Isotherm 1-drawer Freezer with stainless steel door.
Two burner electric cook top.
Convection microwave with stainless steel door above aft counter.
Cabinet with (2) louvered doors on forward bulkhead.
Drawers and storage lockers below counter.
Built-in waste basket.
Large drawer under microwave opens athwartships

Main Salon
“L” settee to port, 5” foam cushions, with storage and Sabre tool drawer under. Sunbrella seat coverings.
High Gloss finished folding table with hi-low pedestal, lowers to coffee table height.
NOTE: when dinette option is selected the salon table is oval and not folding
Settee to starboard with end table forward and entertainment unit with 32” LED flat screen TV on lift.
Sound deadening, soft headliner panels.
Stidd N series helm chair

Varnished cherry interior finish.
Screens on all opening ports.
Ocean Air screen/blinds on deck hatches.
Ocean Air blinds on side windows and side door
Optional fabric and drapery selections.
Dovetailed maple drawer boxes

Fresh Water System
Water capacity 140 gals.
Stainless steel, 11 gal. hot water heater, operates on 110-VAC or engine heat.
Temperature control valve on hot water supply.
Hot and cold water pressure system 12V.
Fresh water spigot in engine room.
Transom shower, hot and cold.
Shore water inlet with filter.

Waste Disposal
Polyethylene holding tank with 60 gallon capacity.
Jabsco Quiet Flush fresh water MSD.
Diaphragm waste pump on holding tank.

Fire extinguishers, (4) at 2 1/2 lbs.
Marelon sea valves on all thru-hull fittings below waterline.
Bonding system to safeguard against galvanic corrosion.
Automatic fire extinguishing discharge system in engine space with override.
(3) Automatic 12V electric bilge pumps.
(3) High water switches and alarm.

Fly Bridge Helm Station
Cummins DTS single lever electronic controls.
Single Cummins Smart Craft display (engine data, tank levels, vessel data, alarms).
(2) Stidd N-series helm seats. (One in main salon)
Table on fixed base
L-settee dry storage below.
16” Stainless steel steering wheel with tilt helm.
Controls (see propulsion)
Stainless steel flybridge ladder with teak treads.



Manufacturer: Sabre

Model: 42 Fly Bridge

Year: 2020

Category: Power

Boat Type: Motor Yacht

Hull Material: Fiberglass

Hull Type: Modified Vee


Length: 42.00 ft

LOA: 46 ft - 14.02 meter

Beam: 14 ft - 4.27 meter

Draft - max: 3 ft 4 in - 1.01 meter

Bridge Clearance: 18 ft 11 in - 5.77 meter

Dry Weight: 31500 lbs

Deadrise Aft: 16.00 °


Make: Cummins

Model: QSB 6.7

Horsepower: 425

Engine Type: Inboard

Drive Type: Pod Drive


Fuel Tank: 380 gallons - 2 tank(s)

Fresh Water Tank: 140 gallons - 1 tank(s)

Holding Tank: 60 gallons - 1 tank(s)


Total Sleeps: 6

Total Heads: 2

Captains Cabin: No

Power options

Cummins / QSB 6.7 425 MHP Base

Commitment to Excellence

All current Sabre models are constructed using their state-of-the-art, VIP resin infusion technology. Sabre’s boat building yards are located in both Raymond, and Rockland, Maine.

Ready for More?

Send us a note using the form below and we will get back to you as quickly as possible.

Request More Information




Please Note:

Due to product improvements, changes during the model year and/or transcription errors that may occur, information represented within this website may not be accurate at the time of your purchase.
If certain information is significant to your purchasing decision, please confirm the information with your dealer.

HELP Close

Contact us now:Mark Barish

Geoff was so good to work with. He helped me through every aspect of the buying process which I really appreciated. He kept in touch with me through email, phone calls and texts to make sure I understood everything. Very helpful from the minute I landed with directions and support for hotel room and dinner options in the area to the purchasing paperwork, sea trials and finally handing over the money and receiving the keys. He made it very easy for a first time buyer.

Glen P.

I have bought 3 boats from Stan Miller Yachts. 2 were Cabo Yachts that I purchased directly from Stan Miller, and recently I purchased a Viking Yacht where Stan Miller acted as my broker. I am very satisfied with the help and service that I got from Stan Miller and I would happily recommend them! Very professional and very smart.

Rob M.

Stan Miller helped me sell my Grand Banks 36 Classic and purchase a Grand Banks 38 Eastbay. The process was simple and enjoyable thanks to Ian McGhie who went above and beyond to share his vast knowledge and stay engaged with all involved parties until the deals were complete. Thanks Ian and Stan Miller team, I wouldn’t go anywhere else to buy or sell a boat.

Bill T.

Ian was fantastic from start to finish. He was quick to understand my needs and perspective and worked hard on my behalf. He is knowledgeable, has a great working knowledge of boats and the market. I would wholeheartedly recommend him.

Steve M.

It was my first time using Stan Miller Yachts brokerage services. My boat was docked in Mexico. I needed an experienced broker that understood both U.S. Coast Guard and Mexican government procedures. I chose Blake Oversmith. Blake did a great job in working with potential buyers. We had a very rapid closing. Blake stayed in touch to help the transition to the new owner. I highly recommend the Stan Miller team and Blake Oversmith.

David T.

Ian, Brad and the Stan Miller Yachts team were wonderful throughout the purchase of my first boat in almost 30 years and first major boat. Ian was patient and happy to answer all my questions and make sure that I understood everything and certainly crossed every “t” and dotted every “i”. I can’t say enough about their integrity, support and expertise. Thanks.

Brock W.

About Us

For over sixty years, Stan Miller Yachts has earned a reputation for being one of the West Coast's premier yacht brokerages, offering a wide selection of new and pre-owned yachts.For boat buyers, we offer a dedicated team of experts to assist in finding the right boat for your cruising needs, lifestyle and budget. For boat sellers, we are able to use our cultivated network and targeted marketing reach to find buyers for a wide variety of yachts - from sportfishing battlewagons to cruising yachts and sailboats.

We are proud to be the authorized dealers for Viking Yachts, Sabre Yachts, Back Cove, Kadey-Krogen Yachts, SUMMIT MotorYachts, Mag Bay Yachts and Valhalla Boatworks.

Learn More

Our LatestNews

July 16, 2021 Sabre Yachts Announces New Sabre 43 Salon Express Exciting news from Maine boatbuilder Sabre Yachts, who just announced the newest model in their fleet - the Sabre 43 Salon Express.... See More
July 13, 2021 Viking Yachts Announces New Viking 64C Model Viking Yachts recently announced the newest model in their sportfish yacht lineup, the new Viking 64C. The Viking 64C will debut at... See More
July 1, 2021 Save the Date for the September Boats Afloat Show in Seattle Save the date! The Boats Afloat Show at South Lake Union returns September 16th through the 19th, at Chandler's Cove on South... See More

@stanmilleryachts On Instagram