2005 Alerion 28 Express
Yacht price :
JUST LISTED 10-6-19
Excellent condition on this very pretty, quick and lively day sailor.
The Alerion Express 28 is a high performance "Gentleman's Day Sailor" with attractive lines and respectable proportions in ballast to displacement and sail area to waterline. The Schumacher design is a tribute to the 1912 Nathaniel Herreshoff "Alerion" which created a stir for her looks and performance when she debuted in 1912. These are very well built and nicely finished.
- 28 Express
- Dana Point, CA, US
- Available for sale in U.S. waters:
- Vessel Name:
- Boat Type:
- Hull Material:
- Hull Type:
- Hull Color:
- Carl Schumacher
- Flag of Registry:
Dimensions & Weight
- 28 ft - 8.53 meter
- 28 ft 3 in - 8.61 meter
- 8 ft 2 in - 2.49 meter
- Draft - max:
- 5 ft 6 in - 1.68 meter
- Bridge Clearance:
- Dry Weight:
- 4400 lbs
- Volvo Penta
- Cruise Speed:
- Joystick Control:
- Engine Type:
- Drive Type:
- Fuel Type:
- 10 (Individual), 10 (combined)
- Max Speed:
- Fuel Tank:
- 7 gallons - 1 tank(s)
- Fresh Water Tank:
- 6 gallons - 1 tank(s)
- Holding Tank:
- 13 gallons - 1 tank(s)
- Total Cabins:
- Total Berths:
- Total Sleeps:
- Total Heads:
- Captains Cabin:
- Crew Cabins:
- Crew Berths:
- Crew Sleeps:
- Crew Heads:
Design & History
The first Alerion was the 26-foot mahogany planked daysailer Nathaniel Herreshoff built for himself around 1912, and which now reposes at Mystic Seaport in Connecticut. Many years later, in the 1970's, his grandson Halsey Herreshoff built a 25-foot version, a one- off that made its way to Florida where it was admired and bought by Alfred Sanford, father of Nantucket builders Alfie and Edward.
The Sanfords liked the boat so much they sought out the plans (Nathaniel's, not Halsey's) and began building a cold molded carvel-planked 26 footer. The boat was faithful to the original, but half a foot beamier (for the inclusion of a modest interior), a bit shorter on the waterline, and with a small cutaway in the aft section of the keel. Like the original, the newer Alerion pointed high and was fast in light air, but was still capable of handling heavy weather. Halsey, meanwhile produced about a dozen of his 25- foot models, in fiberglass, which reputedly were also good sailers.
The Sanford Boat Co launched its first Alerion in 1978 and eventually built 20, raising the price over the years from #21,000 to $44,000. Edward Sanford says there are still several around, and owners have included such notables as America's Cup winner Bill Koch and singer Jimmy Buffet.
But a wooden boat, even a sweet sailing one like the Alerion, is not for everyone, so in the late 1980's Ralph Schacter, a sailor from Southport Connecticut, commissioned West Coast naval architect Carl Schumacher, designer of the Express 27 to draw a boat that combined traditional appearance with modern materials and contemporary "go fast" thinking. The result brought so many comments and inquiries that Schacter joined with Holby Marine of Bristol Rhode Island, to build the boat on a production basis. Holby Marine built seven of the Alerion -Expresses in 1990, then sold the molds to Tillotson-Pearson Industries the following spring. By late 1992, some 25 had been built.
Schumacher, member of the California Santa Cruz -ULDB school of design, might seem an odd choice to update a traditional design. But Schumacher's Alerion -Express is a happy hybrid (if such is possible) of the traditional and the contemporary, even if its truly an Alerion in name only. "This is a modern yacht, not a warmed over re-creation" Schumacher states in company promotional material.
Above the waterline the new boat is if anything more "classic" than its namesake, with increased overhangs and a fine rake to the bow (Herreshoff's original 26- footer had a relatively long 22-foot waterline, making it slightly stubby in appearance). The nine-foot long cockpit is the same as the original, but Herreshoffs 7'7" beam has been increased to 8'2" with three berths (four in the latest design) added below.
In place of the. old bunter rig is a Hall Spars aluminum extrusion, fractionally rigged mast (the same section as on the J27), fully battened mainsail and small, self tacking jib.
But its below the surface that Schumacher's mark is evident. Herreshoff's short keel (2 1/2 feet) and centerboard combination (5 1/2 foot draw with the board down) has been replaced with a racer type elliptical keel and equally modern spade rudder on a basically flat bottom, the design, coupled with lightweight foam core laminate construction (instead of Nat's mahogany-on -oak), makes for a low resistance boat that's swift, especially off the wind.
-Practical Sailor Boat Review
Tillotson-Pearson has gained a reputation for highquality construction, and the craftsmanship on the Alerion-Express maintains that standard. This is a good-looking, well put together boat, with no rough edges and no sign (to our eye) of slipshod technique. With a base price of $33,000 in 1992, this level of quality should be expected.
Hulland deck are vacuum-bagged end-grain balsa covered with uni- and bi-directional glass (of Tillotson's own formula) and a layer of vinylester resin to deter osmotic blistering. Construction techniques have reduced the weight several hundred pounds from the Holby model, according to chief engineer Phil Mosher. Like all TPI boats, this one comes with a limited 10-year warranty against blistering. The hull and deck are through-bolted and bonded with 3M 5200.
This is an attractive boat: the hull is white with an inlaid 1/4-inch gold stripe; the deck is gray nonskid. An afterdeck adds to the traditional appearance. There's enough wood to catch the eye--a teak toerail, teak handrails and teak and Thiokol sole the length of the cockpit. Exterior teak comes sanded and oiled. There are four fixed Bomar ports on the cabin house, and a smoked Lewmar deck hatch. All fittings are quality, from the Lewmar winches to the Harken fairleads and jib track.
The Hall spar is keel-stepped, and TPI had reinforced the area over the external lead keel with a solid fiberglass transverse floor. The rudder stock is carbon fiber with Rulon bearings; the prop shaft has been changed from Holby's stainless steel to carbon fiber composite.
-Practical Sailor Boat Review
Schumacher designed the Alerion-Express to be a quick, lively sailer in keeping with the spirit, if not the form, of the Herreshoff original. TPI intends the boat for the experienced sailor, rather than the novice, who expects good performance but with a minimum of fuss and few if any crew. "Everyone who has bought the boat has had larger boats," Mosher said.
With its light weight, shallow bottom and lowdrag keel and rudder, we expected the boat to be nimble, and it was. In 12 to 14 knots on Narragansett Bay, the boat quickly accelerated to hull speed under its big, fully battened main and 100-percent jib. With a total of 352 square feet of sail (206 in the main, 146 in the jib), the Alerion-Express is not overcanvassed, but carries plenty of sail for its weight (for a sail area/ displacement ratio of 20.97, which is quite high). The boat has a PHRF rating of 141, slower than the J/ 27 (120s), but considerably faster than similarlysized cruiser-racers, including the C&C 29 and Beneteau 29, both with ratings in the 170s.
The tiller is very light, with just a touch of weather helm. the Alerion-Express tacked through 80 degrees easily and rapidly, with no searching for the groove on the new tack.
Because they feel there is insufficient form stability in the hull, engineers at TPI added a lead bulb to a glass fin to increase righting moment and, performance to weather. The trade-off is an increase in draft from 4' 6" to 5'6".
"The Alerion has a lot of initial tenderness," Mosher said, adding that it is "not tender at all under sail." The 2,000 pounds of ballast gives it a ballast/ displacement ratio of 45 percent. The displacement/ length ratio is a moderately light 168.
Our experience in moderate, steady wind was that the boat did tend to heel initially, to about 17 degrees, but then established itself and stayed there. The degree of heel was not unpleasant at all, although from a marketing standpoint it might prove a deterrent to the "mom and pop" sailor, or a family with young members (we imagine the boat would appeal to some well-heeled first-boat buyers as well). But for the experienced sailor moving down in size, the boat will be a delight to sail.
The swept-back, double-spreader rig (37' 5" above the deck) has continuous rigging for easy adjustment.
In addition to the upper shrouds, there are single lowers and intermediates. The backstay is adjustable as well via a line led under the afterdeck to the after edge of the cockpit. Former racers will appreciate being able to bend the spar to optimize performance.
Current models have the mainsheet fitted to a barney post (which doubles as a pedestal for a nice teak cockpit table). This may be a concession to the racing-minded sailor, but we found the post an obstruction, especially during tacks, that defeated the roominess of the cockpit. Future models will offer end-boom sheeting through the traveler as an option.
The whole setup--fully battened main fitted with lazy jacks, self-tacking jib and all lines led aft through rope clutches--is intended to concentrate operations in the cockpit and generally make life easier, especially for the singlehander. Our particular main proved difficult to raise (even cranking the #7 winch) and lower; maybe it was sticky sail slides. The Shore sail was fitted with special load-bearing slides at the battens to make hoisting easier, but we still had problems. On the other hand, one Alerion-Express owner said he routinely raises his UK Sailmakers main by hand. The Alerion-Express comes with a Hall Quik Vang for easier adjustment. Generally, the fully battened main requires some careful trimming of the boom, backstay and at the batten adjustments at the luff. The self-tacking jib is sheeted to a car on a custom Harken track. Because the track is short, sailing wing-on-wing requires use of a pole. Fortunately, there's a grooved storage area outboard of each cockpit seat, making storage of the poles and other gear easy and convenient. Harken roller furling for the 100-percent jib comes standard.
The Alerion-Express, like its early namesake, is a vaunted light-air performer. Mosher said it will reach hull speed in five knots of wind, a claim we find credible. one owner we spoke to said his boat points high, reaches beautifully and is only a bit cranky dead downwind. Initial tenderness or no, Mosher said he's been out in 30 knots with no difficulty--"It doesn't fall on its ear."
-Practical Sailor Boat Review
Because of the nine-foot cockpit and shallow hull, there's not a lot of room down below, but enough to qualify the Alerion-Express as an overnighter and occasional weekender. The hull and bulkheads are an airy white, set off by wood trim and a teak and holly sole. The interior plan is simple, with a V-berth in the bow. Unfortunately, the portable head is located beneath it. The original plan had a settee berth to port in the main cabin with a small seat between two storage compartments on the starboard side. The arrangement didn't make a lot of sense, so TPI replaced the seat/storage area with a starboard settee.
A 38-gallon ice box inside the companionway does double duty as a step down. Behind the cooler, access to the engine compartment is easily achieved by removing either a front or top panel. The original engine of choice, which cost an extra $5,300 in late 1992, was a 9-hp. Yanmar diesel, noisy in the extreme at low revs, but which moves the boat well. The optional Volvo 10hp model MD2010-DBT was offered later.
Ample natural lighting flows through the four elliptical ports and the smoked 19" x 19" hatch forward; we can't be sure, but we suspect the three small interior lights make for dim lighting--fine for relaxing, possibly hard on the eyes for reading. A 12- volt DC system runs off an 80 amp-hour marine battery, controlled by a Bass electrical panel with six circuit breakers. There's a standard Guest battery switch.
The original interior is a bit cramped for headroom, a problem TPI improved somewhat by converting the hatch to a double-slider. The house designers also widened the companionway by nine inches. Cockpit hatches to port and starboard provide access to the aft regions below; there's further storage under the afterdeck.
Life on the Alerion-Express is meant to be lived in the cockpit, which is deep, comfortable and dry-- except for occasional spray to remind forward passengers they're under sail. The seats are wide and comfortable, especially with the addition of cockpit cushions, but if anything the cockpit is a little too wide forward. That's fine when the boat sails flat, but heeling makes it necessary for a shorter person (say, under 5' 9") to scrunch down uncomfortably to brace their feet against the opposite side. On a long beat this could cause lower back fatigue.
Under the afterdeck is a teak rail with handy cup holders. A manual Whale bilge pump on the port side empties, unfortunately, via a ribbed plastic hose at the stern--a jarring touch in an otherwise genteel appearance. Cockpit drains consist of two Elvstromtype openings at the rear of the cockpit, as on a J/24. They can be fastened shut, which is just as well because the leeward side tends to admit, rather than expel, water. Finally, one owner complained mildly about the need for stern chocks.
Minor criticism aside, the boat, inside and out, is functional and reasonably comfortable. the optional teak table that sits on the barney post is an inviting call to stay topsides. Removal of the post, however, which we'd prefer, means end-boom sheeting, which performance sailors probably won't like. It also raises the question of where and how to set up a table for the brie and chardonnay.
-Practical Sailor Boat Review
- Garmin 2010C GPS plotter
- Navman 3100 Speed
- Navman 3100 Wind
- Navman 3100 Depth
- Raymarine ST2000 Tillerpilot
- Icom IC-M502 VHF radio
Volvo/ Penta MD2010-DBT 10 hp & MD 130 Sail Drive
The MD2010 is a marine engine of advanced design manufactured from quality components and designed to fulfill customer requirements.
The MD2010 is fitted with freshwater cooling as standard. This reduces internal corrosion and enables the engine to maintain a consistent and optimal working temperature under all conditions.
To avoid galvanic corrosion the engine is equipped with the unique electrical isolation between engine and transmission.
Smooth running with very low vibration levels results from a dynamically balanced design incorporating a flywheel of high rotating mass and high efficiency rubber isolation.
The engine's high torque provides excellent operating characteristics to aid maneuvering, particularly in confined spaces.
The drive is a MD-130 Sail Drive with manual reverse/ reduction gear. Gori bronze geared folding 16LH9 propeller
Engine and block
-- Cylinder block and cylinder head manufac- tured from high grade cast iron. Crankcase features a rigid tunnel block design.
-- Chrome molybdenum forged crankshaft, statically and dynamically balanced with in- tegral counterweights. Pistons are cast from high silicon aluminum, are heat treated and fitted with two cast iron, chromium faced compression rings and a single oil ring.
-- Replaceable, hardened valve seats -- Elastic coupling on flywheel
-- Tuned front and rear cushion-type rubber mounts. Adjustable.
-- Spin-on fullflow oil filter
-- Separate oil scavenger pipe
-- Closed circuit crankcase ventilation
-- Flange mounted, cam driven in-line injection pump
-- Feed pump with hand primer -- Spin-on type fine fuel filter
-- Freshwater cooled exhaust manifold and seawater cooled exhaust elbow
-- Freshwater cooling system governed by thermostat
-- Tubular heat exchanger with integral expan- sion tank
-- Coolant system prepared for hot water outlet fittings
-- Easily accessible sea water pump and im- peller
-- 12V corrosion-protected electrical system
-- 14V/60A marine alternator
-- Charging regulator with electronic sensor for
voltage drop compensation
-- Glow plugs for excellent cold starting
-- Electric starter motor (0.7 kW output)
- 12 volt DC system
- 120 volt AC shore power system
- Two Group 24 twelve volt batteries in separate banks
- Digital marine multi bank battery charger
- DC navigation, cabin, foredeck lights
- Ullman full batten Dacron mains'l
- Harken roller furling
- 100% self-tacking Ullman Dacron jib with UV cover
- 2 Lewmar #30 STC primary winches
- 2 Lewmar #14 STC multi-purpose winches
- 13 lb Danforth anchor 20' chain & 150' estimated line.
- Swim ladder
- Boat Cover
- Cockpit cushions
- DC electric bilge pump
- Manual bilge pump
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.